I’m a big fan of foam camera cases. I’ve tried a few different brands, but my favorite so far is the Camera Case With Foam from B&H Photo. This case has a thick layer of foam on the bottom and sides, which protects your camera from impact if you drop it or set it down too hard.
The top and bottom of the case are made of durable nylon, so it’s built to last. And the best part is that it only costs $20!
If you are in the market for a new camera case, you may want to consider one with foam. Foam cases offer superior protection for your camera and lenses, and can help keep them safe from bumps and scratches. Here are a few things to keep in mind when shopping for a foam camera case:
Size: Make sure to choose a case that is big enough to fit your camera and all of your accessories. You don’t want anything too snug, as this could cause damage to your equipment. Material: Most foam cases are made from EVA or polyethylene foam.
EVA is more durable and provides better impact protection, while polyethylene is lighter weight and cheaper. Choose the material that best suits your needs. Closure: Many foam cases have a zip-up closure, but some also have Velcro or snap closures.
Again, choose the option that best suits your needs.
How to Easily Cut Foam for Camera Case
What Kind of Foam Do You Use for a Camera Case?
There are a few different types of foam that can be used for camera cases, depending on the specific needs of the case. Closed cell foam is a good option for cases that need to be water resistant or waterproof, as it will not absorb water. This type of foam is also often used in life jackets and other flotation devices.
Open cell foam is more breathable than closed cell foam, making it a good choice for cases where moisture might be an issue. This type of foam is also softer and more cushioning, making it ideal for impact protection.
What Type of Foam is in Pelican Cases?
If you’re looking for a top-of-the-line case to protect your valuable equipment, Pelican is a great option. But what kind of foam is inside these cases? Pelican cases are lined with closed cell polyethylene foam.
This type of foam is known for its durability and resistance to water and other fluids. It’s also resistant to mold and mildew, making it a good choice for storing equipment in humid or wet conditions. The closed cell structure of this foam also makes it very strong and supportive.
It will cushion your equipment against impact and prevent it from shifting around inside the case. Overall, closed cell polyethylene foam is an excellent choice for lining Pelican cases. It’s durable, protective, and resistant to moisture and mold – everything you need to keep your valuables safe during transport.
Cuttable Foam for Cases
As an Amazon Associate I earn from qualifying purchases. If you are looking for a way to protect your valuable items while traveling, consider using cuttable foam. This type of foam is designed to be easily cut with a utility knife or scissors, making it ideal for customizing the fit of your case.
Cuttable foam can be used to line the inside of hard-sided luggage, soft-sided luggage, backpacks, and even computer bags. Cuttable foam comes in a variety of thicknesses, so you can choose the level of protection that best suits your needs. For example, if you are carrying fragile items such as electronic equipment or glassware, you may want to use thicker foam to provide extra cushioning.
On the other hand, if you are just looking for basic protection against scratches and scuffs, thinner foam will suffice. Most cuttable foams are made from polyethylene or polyurethane materials. These materials are lightweight yet durable, making them ideal for travel applications.
Cuttable foam is also relatively inexpensive, so it is a great way to save money on packaging costs without sacrificing quality or protection.
Diy Foam Inserts for Cases
If you’re like me, you love your gadgets and gizmos. You want to keep them safe when you’re not using them, but you don’t want to spend a lot of money on fancy cases. Foam inserts are a great way to protect your stuff without spending a lot of cash.
Here’s how to make your own foam inserts for cases. You’ll need: -A knife or scissors
-A ruler or measuring tape -A pencil -Foam sheets (I like the kind that’s used for packing)
-Adhesive (I used spray adhesive, but you could use double-sided tape) First, measure the inside of your case. Measure the length, width, and height.
Then, add 1/2 inch to each measurement. This will give you some wiggle room when you’re cutting out the foam insert. Next, cut out a piece of foam that’s the size of your case + 1/2 inch.
Now it’s time to cut out smaller pieces of foam to create compartments within your insert. I like to use a grid system so that everything has its own space and isn’t just floating around in the case. To do this, start by drawing lines down the length and width of your insert piece with a pencil.
Then, use a ruler or measuring tape to mark off equal intervals along these lines. I usually do 1 inch intervals, but it depends on how small or large your gadget is. Once you have your grid marked off, start cutting along these lines with a knife or scissors until you have a bunch of smaller squares or rectangles that will fit snugly into your case compartmentalize everything in its own space! Finally, adhere the smaller pieces of foam into place within the larger insert piece using spray adhesive or double sided tape.. And there you have it! A custom made foam insert that will keep all of your gadgets safe and sound – without breaking the bank!
Harbor Freight Hard Case With Foam
Harbor Freight is a popular retailer that specializes in selling affordable tools and equipment. One of the company’s most popular products is the Harbor Freight Hard Case With Foam. This product is a durable and weather-resistant case that comes with pre-cut foam inserts.
The case is perfect for storing and transporting tools, equipment, and other items. The case is also stackable, so it can be easily stored in a garage or shed.
Small Hard Case With Foam
A small hard case with foam is a great way to protect your valuables while traveling. The case will keep your items safe from being crushed or damaged in transit, and the foam will cushion them against any bumps or jostling. This type of case is ideal for carrying electronics, jewelry, or other delicate items.
Be sure to measure your items before purchasing a small hard case with foam, so that you can be sure it will fit everything you need to transport.
Hard Case Foam Inserts
Hard Case Foam Inserts protect your valuables during transport. They are made of high-density polyethylene (HDPE) foam which is durable and will not absorb water. The foam is also resistant to mold, mildew, and bacteria.
Hard Case Foam Inserts are available in a variety of sizes and thicknesses to fit your needs.
Cheap Hard Case With Foam
If you’re looking for a cheap and cheerful way to protect your equipment, then a hard case with foam is the way to go. This type of case is typically made from ABS plastic, which is both lightweight and durable. The foam interior provides cushioning and support for your gear, whilst the hard outer shell protects it from bumps and scratches.
You’ll find that most cases have cut-outs for handles and wheels, making them easy to transport. So, what are the benefits of using a hard case with foam over other types of storage solutions? Firstly, they’re relatively inexpensive – especially when compared to custom-made cases.
If you’re looking for a new camera case, you may want to consider one with foam. Foam cases are great for protecting your camera and gear from bumps and scratches. They also provide a bit of cushioning if you drop your camera.
And, if you’re worried about moisture, most foam cases are water-resistant.